Sunday 25 May 2014

PST ZIS-6 Truck - Flatbed & windscreen

This progresses nicely. I am quite pleased with the general quality of this PST kit - especially when I compare it to my previous experiences of the other Eastern European kits I have made from MW and ACE - and I will certainly buy more from the PST range.

Onto the flatbed, there isn't a lot to it but it fits together well enough. While making this I also added a driver figure and painted the inside of the cab, the driver was just a random figure I had laying around and isn't the best but I guess you won't see that much of him...


I have decided - after much consideration - to make and fit the transparent plastic windscreens before I glue the cab together - just to make it easier to install the 'glass'. This does mean that I will have to mask the windscreens before I spray the truck body with it's primer coat, but that isn't a big deal.

As I said earlier, luckily all the windows in the ZIS are rectangular so there is no complicated cutting out to do and as usual I will be using Formula '560' canopy glue to stick the transparent plastic in place (although I am still unsure what advantage this has over cheap PVA glue).

I've used masking tape to protect the transparent plastic during fitting and
during the base coats spraying phase (which is next).
Time to put all the components together for the first time and have a look at what the truck looks like. It really does look a bit of a mongrel with all the various colours of plastic PST uses for this kit  BUT it all works in the end and that's all that matters...

All the major components are just dry fitted, I will be disassembling the
truck again in order to spray on the base coat of Humbrol Light Olive.
It really is a handsome little truck and I am sorely tempted to get some more of these (especially as they come in so many variants), but I will have to leave that until my Finnish project is done as I now more or less have filled my truck inventory for that now. Still, I have the PST ZIS-5V still to make for this project and that's almost exactly the same kit but with a single rear axle!

Next: Base coat.

No comments:

Post a Comment